Trident TVGA8900CL - Page 33

4-3.1.2
AutoCAD/386 Release 10 and 11 (PDI Driver)
To install the drivers for AutoCAD/386, release 10 and 11, you will
need to copy the display driver from the \TVGAUTIL\ACAD386
directory on your hard driver to your AutoCAD/386 directory. For
example, if your AutoCAD/386 directory is in your C: drive, and the
driver/utility is installed in your D: drive type:
Copy D: \TVGAUTIL\ACAD386\RCPTVGA.EXP C: NACAD386
The display drivers (RCPTVGA.EXP) will be copied to your
AutoCAD/386 directory (e.g. C:\ACAD386).
The command SET DSPADI = RCPTVGA must now be added to
your Autoexec.bat file. Use any ASCII text editor (e.g. DOS 5.0
EDIT.EXE command) to modify the Autoexec.bat file in the root
directory of your boot disk drive. Re-boot your system after the
Autoexec.bat file has been modified.
The remaining steps need to be completed inside AutoCAD. They
are listed in a text window. You may note them down or reference
steps 5 through 8.
Run ACAD.EXE from the AutoCAD/386 directory.
Select in order, Configure AutoCAD, Configure Video Display
and ADI P386 Display.
Choose one of the graphics drivers.
A number of prompts follow which allow you to select the graphics
area background color, text color (for the menu, status line, and
command promptareas of thescreen), text background color, border
color, and dialogue box/button outline color. To select the default
colors, press [Return] at each prompt. To select a different color,
enter the appropriate color number at the given prompt.
NOTE: For 16-color modes, you can only select black or white for
graphics background color.