Trident TVGA8900CL - 4-3.7 Microsoft Word for DOS

1. Ifthe VGA BIOS on yourcard is version C3.Oor later, you can select
the VESA driver that is included in the WordPerfect 6.0 program.
If the VGA BIOS is a version earlier than C3.0, you will need to run
the VESA.EXE utility program located on your VGA Driver/Utility
diskette. Please see section 2.2.2 for more information on VESA —
BIOS Extension. xi
2. Make sure you have selected and installed the VESA driver from
WP6.0 installation program. Boot-up the WordPerfect 6.0 program,
and select "Graphic Mode" from the View pull-down menu.
3. Select "Setup" from the "File" pull-down menu. Select "Display",
and choose "1" to select the different graphic mode driver. Choose
"1" forScreen Type. Highlight" VESA VBE", and select the desired
resolution. Follow the instructions on the screen to complete
installation.
.4-3.7 Microsoft Word for DOS
4-3.7.1
MS
Word
5.0
u
1. You will need to copy the MS Word driver from the \TVGAUTIL
Word directory on yourhard drive into your MS Word 5.0 directory
(e.g.\Word50). For example, if your MS Word 5.0 is installed in
drive C: and the Driver/Utility is installed in drive D:, type:
Copy D:\TVGAUTIL\WORD\SCREEN.VID C: NWORD5O
The display drivers (SCREEN.VID) will be automatically copied to
the Word directory.
2. The remaining steps need to be completed inside MS Word. They
are listed ina text window. You may note them down or reference
steps 3 through 5.
3. Run MS Word 5.0 by typing "WORD" at your MS Word 5.0 __
directory.