Trident TVGA8900CL - Page 46

1. It will be assumed at this point that you have already installed
Microsoft Windows 3.1 using the standard IBM VGA driverand that
it is working properly. If haven't installed Windows 3.1, exit the
Installation Program and complete the Microsoft Windows installa-
tion.
Ses
2. Run Windows 3.1 to display the program manager window.
3. Insertthe Trident Driven Utility Diskette into your floppy disk drive
(e.g. A:).
4. Select FILEMANAGER atthe main window, and specify the floppy
drive location of the Trident Driven Utility Diskette.
5. Selectthe TINSTALL.EXE file in the WIN directory of your floppy
drive to begin installation. TINSTALL.EXE will automatically
install all driver files to a subdirectory named TRIDENT on your
hard disk. All related font files will be installed to the Windows system
directory. A Windows Group named Display Driver & Utility,
which includes Driver Setup, Uninstall, and Power Management
(for centain video controller boards) icons, will be created.
6. Click on "Driver Setup" icon, then highlight the TVGA Driver/
Utility and click on "Select". Select the suitable Trident driver from
the menu and click on SETUP. Follow the instructions on the screen
to complete the driver installation.
To install Power Management Feature
For
certain
video
controller
boards
(e.g.
TGUI9400CXi
or
TGUI9420DGi),
after
the
installing
the
drivers,
you
will
see
another
program
called
Power
Management
in
the
Display
Driver
&
Utility
window.
Power
Management
is
designed
for
energy
saving
monitors
which
match
the
VESA
Display
Power
Management
Signaling
(DPMS)
standard.
If
your
monitor
meets
the
VESA
DPMS
specification,
you
may
use
the
Power
Management
feature
to
decrease
the
amount
of
energy
used
by
your
monitor.