Trident TVGA8900CL - Page 53

Solution:
a. Reread installation procedures to be sure you have installed the
drivers correctly.
b. Did Windows display an error message before hang-up?
If no:
Check CONFIG.SYS and AUTOEXEC.BAT files and minimize
TSRs (Terminate and Stay Resident Programs) or Device Drivers,
suchas, DEVICE-MOUSE.SYS in CONFIG.SYS or PCTOOLS.EXE
in AUTOEXEC.BAT.
If SYSTEM.INI ( located in the WINDOWS\SYSTEM directory)
has been edited, try replacing with a clean version from the original
Windows diskettes.
Delete and reinstall the driver(s).
If yes:
If Windows reports “... file corrupted”, delete Trident driver files and
use a new set of drivers.
If installing on a network via “SETUP/N”, you will need to use the
"EXPAND" utility (located on original Windows diskettes) to
expand the display drivers.
If installing on a network and Windows reports “error building
WIN.COM”, you will need to upgrade to Windows version 3.00a.
Problem: Garbage on the screen or double images.
Solution:
a. Use View Option (F5) in SVM program to verify the problem.
b. Check jumper J7. Be sure the jumper setting is correct for your
monitor.