Triner Scale TS-700 Series - Calibration Parameter Settings (C01-C07)

Operating Guide | TS-700 Series
A-4
Appendix For Scale Technicians
PARAMETER
FUNCTION
OPTIONS
C01
Default weighing
unit
1 = kg
2 = lb
Description:
With C01 flashing, press the
key, then use the up or
down arrow keys to change
the parameter setting as
needed.
Press the key to accept
the setting and continue on
to the next parameter.
C02
Decimal location
0 = none
1 = one decimal place
2 = two decimal places
3 = three decimal places
Description:
With C02 flashing, press the
key, then use the up or
down arrow keys to change
the parameter setting as
needed.
Press the key to accept
the setting and continue on
to the next parameter.