Page | 19
ONLINE: TRINITYAPPLIANCES.COM.AU
5.2 USING TOUCH CONTROLS
The controls respond to touch, so you don’t need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g. a
utensil or a cloth) covering them. Even a thin film of water may make the controls
difficult to operate.
5.3 OPERATION
FIRST TIME OPERATION
Clean the ceramic cooktop surface from the dust or any other foreign object
Place a saucepan filled half full with cold water on a cooking zone.
Switch on one cooking zone at a time, for up to 5 minutes at the maximum setting.
This will help to eliminate any new smell that exists and evaporate any humidity
that has formed on the heating elements.
Turn on ONLY one heating zone at the time.
SWITCHING ON/OFF COOKING ZONE AND SETTING POWER LEVEL
To Next Page
Loading...