Page 6
* Operating Frequency (RF): 400KHz to 500KHz
* Signal Indicators: Speaker outputs Tracer Signal and LED indicates signal strength
* Earphone Jack: Accepts 1/8” mono or stereo earphone plug, 8 Ohms to 50 Ohms. Automatically mutes
speaker.
* Headlights: 2 High Brightness White LEDs
* Speaker: Rugged 1.5” Mylar Cone with Alnico Magnet
* Thumbwheel RF Sensitivity adjustment
* Power Switch: Pushbutton turns on HotWire Hound as long as the button is held in
* Battery: 9 volt alkaline
* Battery Life: Approx 5 Hours continuous in Trace Mode when receiving signal, 25 Hours continuous
when not receiving signal
* Size: 1-7/8” dia at speaker, 1-3/8” dia at body, 7-1/2” long
* Weight: Less than 9 ounces including battery
5: Specications for HotWire Hound
To Next Page
Loading...
