Safety
Do not operate the meter in environments where the following are
present: explosive gases (or materials), combustible gases (or
materials), steam, or dust.
Please replace the battery immediately when the low battery symbol
appears on the LCD.
Do not touch the meter’s circuit board for any reason; static
electricity or contamination could damage the sensitive
components.
This instrument was designed for pollution
degree 2. Operation Altitude: Up to 2000m
(7000’).
Description
1. Photo Detector Cover
2. Photo Detector (Sensor)
3. LCD Display
4. Lux/Fc Button
5. Calibration and ZERO Button
6. Data Hold Button
7. MAX/AVG/MIN Button
8. Power Button: ON/OFF
To Next Page
Loading...
Need help?
General
