EasyManua.ls Logo

Tripp Lite APSX1012SW User Manual

Tripp Lite APSX1012SW
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Owner’s Manual
Sine Wave DC-to-AC Inverter/Chargers
Models: APSX1012SW, APSX2012SW
12VDC to 230VAC
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2011 Tripp Lite. All rights reserved.
Table of Contents
Important Safety Instructions 2
1. Overview & Features 3
1.1 Overview 3
1.2 Indicators, Controls and Settings 3
1.3 Optional Features 6
2. Battery Charger 6
2.1 Mode of Operation 6
2.2 Transfer Switching Speed 6
3. Battery Installation
and Maintenance 6
3.1 Select Battery Type 6
3.2 Monthly Maintenance 8
3.3 Battery Installation 8
3.4 Battery Connection 8
4. Inverter/Charger
Installation and Operation 10
4.1 Installation 10
4.2 Installation Diagrams and Charts 10
4.3 Installation and Start-Up 11
5. Technical Specifications 11
6. Troubleshooting 12
7. Service 12
Español 13
Français 25
Ðóññêèé 37
201110117 93-3054.indb 1 11/9/2011 10:57:55 AM

Table of Contents

Other manuals for Tripp Lite APSX1012SW

Question and Answer IconNeed help?

Do you have a question about the Tripp Lite APSX1012SW and is the answer not in the manual?

Tripp Lite APSX1012SW Specifications

General IconGeneral
BrandTripp Lite
ModelAPSX1012SW
CategoryInverter
LanguageEnglish

Summary

Important Safety Instructions

Location Warnings

Warnings about installing the inverter/charger in suitable locations to avoid hazards.

Battery Connection Warnings

Crucial warnings regarding safe battery connections and potential hazards.

Ground Connection Warnings

Importance of proper grounding for safe operation and electrical shock prevention.

Equipment Connection Warnings

Warnings about using the equipment in specific applications and potential performance issues.

Operation Warnings

Safety precautions during the inverter/charger's operation and maintenance.

Battery

3.1 Select Battery Type

Guidance on selecting appropriate 12V Deep Cycle batteries for optimal performance.

3.1.1 Match Battery Amp-Hour Capacity to Your Application

Steps to determine total wattage, DC amps, and battery amp-hours needed.

3.4 Battery Connection

Procedures for connecting the inverter/charger to the battery bank.

3.4.1 Connect your Inverter/Charger to your batteries

Detailed steps for DC wiring, fuse placement, and cable specifications.

Installation and Operation

4.1 Installation

General installation guidelines covering environment and grounding.

4.1.2 System Grounding

The importance of proper grounding for safe operation and compliance with codes.

4.3 Installation and Start-Up

Step-by-step guide for connecting the unit and initiating startup.

Technical Specifications

Troubleshooting

Related product manuals