3
System Requirements
• DisplayPort monitor
• USB Keyboard
• USB Mouse
• Computer with a DisplayPort and USB port
Installation
Note: Make sure the power to all devices is turned off prior to installation. You must
unplug the power cords of any computers that have the Keyboard Power On function.
1. Plug your USB keyboard, mouse and DisplayPort monitor into the console
ports on the unit.
2. (Optional) A USB hub can be connected to the USB console mouse port,
allowing you to add multiple USB peripherals to your installation.
Note: To ensure proper functionality, use a hub with an external power supply. The
USB console mouse port supports USB 1.1 speeds.
3. (Optional) Plug your speakers and/or microphone into the audio jacks on
the side of the unit.
4. Plug the connectors of the built-in cables into their respective ports on
the computers you are installing.
5. Power on your devices.
Note: The unit’s power on default is to link to the first computer that is powered on.
18-10-178-933895.indb 3 10/23/2018 1:49:33 PM
To Next Page
Loading...
Need help?
General
