To Next PageTo Next PageHow to resolve distorted display on Tripp Lite B051-000?
If the display on the remote console of your Tripp Lite Remote Control is distorted and Autosync isn't fixing it: * Try switching ports to one with a different resolution and then switch back. * Lower the resolution and refresh rate for the computer/server connected to the port.
What to do if Tripp Lite B051-000 Remote Control has CA Root certificate error?
If you're logging in and your browser says a CA Root certificate isn't trusted, or you get a Certificate Error response, you can trust the certificate and proceed.
Why are Tripp Lite B051-000 Lock LEDs not accurate?
If the Lock LEDs on your Tripp Lite Remote Control's Control Panel don't accurately reflect your Lock status, click the LEDs on the Control Panel until they match those on your keyboard. Once they're aligned, changing a Lock LED on the keyboard will also change it in the Control Panel, and vice versa.
What to do if Tripp Lite Remote Control has sudden loss of network connection?
If you're experiencing a sudden loss of network connection with your Tripp Lite Remote Control B051-000, close your current connection, wait about 30 seconds, and then log in again.
Why does Tripp Lite Remote Control show '404 Object Not Found' error?
If you're seeing the message '404 Object Not Found' when logging in from a browser, and a login string has been set, ensure you include the forward slash and the correct login string when specifying the B051-000 IP address.
What to do if Virtual Media doesn’t work on Tripp Lite B051-000 Remote Control?
If Virtual Media isn’t working on your Tripp Lite Remote Control, ensure that the Virtual Media cable is properly connected.
Why are the mouse and keyboard not responding on Tripp Lite B051-000?
If you're experiencing mouse and/or keyboard unresponsiveness while accessing your Tripp Lite Remote Control via local console: * Unplug and replug the cable(s) from the console port(s). * Turn the connected computer/server off and then back on. Remember, all connected devices should be powered off when connecting to the unit.
General| Model | B051-000 |
|---|---|
| Category | Remote Control |
| Number of Local Users Supported | 1 |
| Number of Remote Users Supported | 1 |
| Voltage Rating | 5V DC |
| Power Rating | 2.5W |
| Ports | 1 |
| Control Method | Hot Keys |
| Current Rating | 500mA |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
