EasyManuals Logo
Home>Tripp Lite>Inverter>PINV2000

Tripp Lite PINV2000 User Manual

Tripp Lite PINV2000
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
Troubleshooting/Maintenance
Fusing
Your Tripp Lite inverter is fitted with fuses which should not have to
be replaced under normal operating conditions. Blown fuses usually
indicate a reversed polarity or short circuit within the device or
equipment.
WARNING! The internal fuses are not user-serviceable. Do not
open the unit under any circumstances or you may void your
warranty. Contact Tripp Lite Customer Support for assistance if
fuses are blown.
Maintenance
Your Inverter requires no maintenance and contains no user-
serviceable or replaceable parts, but should be kept clean and dry at
all times. Periodically check, clean and tighten all cable connections as
necessary, both on the unit and on the battery.
Maximum output power (continuous or peak) is only available when the
vehicle battery is properly charged. Run the vehicle’s engine often to
maintain a proper charge.
The Inverter can operate with your vehicle engine off, but best
performance is usually attained when the engine is running. Because
the Inverter converts but does not produce electrical energy, the
Inverter’s performance is relative to the condition of your vehicle’s
electrical system (battery, alternator and wiring). If other loads (air
conditioner, heater, lights, etc.) are also using power, you may get less
runtime.
19-04-283-9338A1.indb 22 5/2/2019 3:49:34 PM

Other manuals for Tripp Lite PINV2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tripp Lite PINV2000 and is the answer not in the manual?

Tripp Lite PINV2000 Specifications

General IconGeneral
BrandTripp Lite
ModelPINV2000
CategoryInverter
LanguageEnglish

Related product manuals