29
TRISAN S8 UTILITIES MENU F2
Working with database
Requirements keyboard and/or scanner
USB cable for computer connection
TRISAN S8 Downloader
Upload test results
Connect S8 to computer via USB cable, ensure power is off before connection is made. Then power ON.
Open up the downloader utility file on your computer and follow set up procedure.
Press F2 from select task screen and press START to Upload test results
Message: Uploading verify data transfer on computer (view data scrolling up in the downloader window)
Progress bar will migrate from left to right as results are uploaded
Delete test results
Deletes results stored in the S8
Press F2 from select task screen and scroll down to Delete test results
Press START
Message prompt: Confirm delete result?
Start (Y) Reset (N)
Cannot recover results once deleted
Enable Database:
Storing results and details to a database. Enter utility menu (F2) from select task screen.
Scroll down to Enable database
Press START
S8 is now in database mode.
Next set-up or enable database requirements:
Ask for venue
…. ……. press START …..ask before every test? START for YES (Y)
RESET for NO (N)
Ask for technician
… press START….ask before every test?
Information on Venue and technician will be lost if required to turn off tester. You will need to input information
again unless your tester is battery optioned. Need only input information once between each testing session.
Ask for appliance number
...press START ….ask before every test?
Ask for visual inspection
…. press START…..ask before every test?
Ask for tag number
……….. press START…..ask before every test? RESET for NO
The tag number is not required if appliance number is entered. Generally, tag numbers do not serve any purpose any
more and are unproductive.
Ask for comment
………….. press START…..ask before every test?
Set-up information is complete
The clock time and date will also accompany information when uploading information to computer.
This information is useful for productivity considerations (time stamped testing).