Definition of Terms
1
MicroIQ Electronic Lock Programming Guide
Definition of Terms
Term Meaning
Factory Code
1-2-3-4-5
This is the preset Master Code set at
the factory.
Master Code This is the new code you will use
to permanently replace the Factory
Code.
User ID # This is the location or two digit
memory number used to store
each user’s individual Access Code.
(twenty five are available)
Access Code(s) This is the five digit code used by
each individual user to unlock the
unit.
Control Key-Fob Optional: Used to access and
program the lock.
Operating the Lock With an Access Code
1. Enter the 5-digit Access Code. The Factory Access Code is 1-1-1-1-1.
2. Rotate knob clockwise to unlock.
3. Rotate the knob counter-clockwise to lock.
(no code required to lock)
Wait for green light and an an audible beep.
To Next Page
Loading...