6
router before proceeding with
any work.
• Keep your hands away from the
rotating bit.
• Make sure that the bit is not in
contact with the work when you
switch the machine on.
• Before using the tool to make a cut,
switch on and let it run for a while.
Watch for vibration or wobbling that
could indicate an improperly installed bit.
• Take notice of the direction of
rotation of the bit and the direction
of feed.
• Always switch off and wait until the
bit has come to a complete stand
still before removing the machine
from the work piece.
• Do not touch the bit immediately
after operation. It may be extremely hot
and could burn your skin.
• Ensure that you have removed
foreign objects such as nails and
screws from the work before
commencing operation.
• Rags, cloths, cord, string and the
like should never be left around the
work area.
• Use safety equipment including
safety goggles or shield, ear
protection, dust mask and protective
clothing including safety gloves.
General Safety Rules
To Next Page
Loading...
Need help?
General
