Why is the water too hot in my Triton T80Z?
If the water from your Triton Plumbing Product is too hot, try the following: * Increase the flow rate using the temperature control. * Clean or replace the blocked sprayplate in the showerhead. * Ensure stop valves are fully open and check for blockages in the inlet filter. * Readjust the flow rate to increase flow if the ambient water temperature has increased. * Select ‘economy’ power.
How to fix a Triton T80Z shower with no water flow?
If your Triton Plumbing Product shower is inoperable with no water flow, it could be due to an interrupted power supply (blown fuse or circuit breaker). Check the power supply and renew or reset the fuse or circuit breaker. If the problem persists, consult a qualified electrician. Alternatively, there may be a unit malfunction or power cut. Check other appliances, and if necessary, contact your local Electricity Supply Co. Have the unit checked by ringing Customer Service.
What to do if Triton Plumbing Product water is too cold?
If the water from your Triton Plumbing Product is too cool or cold, you can try the following: * Reduce the flow rate using the temperature control. * Readjust the flow rate to give reduced flow if there's a reduction in ambient water temperature. * Select ‘high’ power.
Crucial safety warnings and precautions for operating the shower.
Instructions for correctly positioning the shower unit on the wall.
Steps for connecting the water supply to the shower unit.
Guidance on connecting the power supply to the shower unit.
General| Type | Electric Shower |
|---|---|
| Finish | White |
| Start/Stop Button | Yes |
| Cable Entry Points | Bottom |
| Power Ratings | 8.5 kW |
To Next Page
