Triton TSPS450 Operating And Safety Instructions

4
GB
V Volts
~, AC Alternating current
A, mA Ampere, milli-Amp
n0
No load speed
n Rated speed
opm Orbits or oscillations per
minute
spm Strokes per minute
°
Degrees
Ø Diameter
Hz Hertz
, DC Direct current
W, kW
Watt, kilowatt
/min or min
-1
Operations per minute
rpm Revolutions per minute
dB(A) Decibel sound level
(A weighted)
m/s
2
Metres per second
squared (vibration
magnitude)
Technical Abbreviations Key
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
Toxic fumes or gases!
Always disconnect from the power supply when adjusting, changing
accessories, cleaning, carrying out maintenance and when not in use!
Dust extraction required or recommended
For indoors use only!
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Specification
Model no: TSPS450
Voltage: 220-240V~, 50/60Hz 450W
No load speed: 2000/min
Oscillations: 58opm
Stroke length: 16mm
Sanding sleeve sizes: 13mm, 19mm, 26mm, 38mm, 51mm,
76mm dia
Dust port: 38mm
Table size: 370 x 295mm
Spindle dimensions: 12.7mm x 1.5mm thread
Protection class:
Dimensions (L x W x H): 390 x 330 x 450mm
Weight: 12.9kg
As part of our ongoing product development, specifications of Triton products may alter
without notice.
Sound and vibration information:
Sound Pressure L
PA
: 76dB(A)
Sound Power L
WA
: 89dB(A)
Uncertainty K: 3dB
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Original Instructions
Introduction
516693_Z1MANPRO1.indd 4 30/08/2016 16:28

Triton TSPS450 Specifications

General

Brand	Triton
Model	TSPS450
Category	Sander
Language	English