What to do if Triumph Adler CLP 4416 Printer says 'Close left cover'?
If your Triumph Adler Printer displays 'Close left cover', it means that the left cover of the printer is open. Close the left cover to continue printing.
Why Triumph Adler CLP 4416 Printer prints status page but not from computer?
If your Triumph Adler Printer prints a status page but not jobs from your computer, check the printer cable connections at both ends. You might also want to try replacing the printer cable or the interface cable. If the problem only happens with a specific file or application, review the printer driver settings for that application and try printing another file or using another print command.
What to do if Triumph Adler CLP 4416 says 'Check waste toner box'?
If your Triumph Adler Printer displays 'Check waste toner box', it means either the waste toner box is not installed or it is full. Install a new waste toner box to resolve the issue.
How to resolve grey background issue on Triumph Adler CLP 4416 Printer?
If your Triumph Adler Printer is producing a grey background, try the following: * Clean the main charger units by opening the left cover and slowly pulling the green wire cleaner knob to each of the main charger units in and out a few times. * Check the charger units installation. Open the left cover and check that the charger units are correctly installed and seated as far as it will go. * Perform color calibration either by switching the printer off then on or using the printer operator panel.
Why does my Triumph Adler Printer say 'Add paper MPTray'?
If your Triumph Adler Printer displays 'Add paper MPTray', it means the paper has run out in the indicated paper source. Simply add paper to the paper source displayed which could be the paper cassettes, MP tray, optional paper feeders, or optional envelope feeder.
What to do if Triumph Adler CLP 4416 won't turn on?
If nothing lights up on the operator panel of your Triumph Adler Printer, and the fan isn't running, try these steps: First, turn off the printer, unplug the power cord, plug it back in securely, and then try turning the printer back on. Also, make sure the power switch is in the On position.
How to fix black or white vertical streaks on Triumph Adler CLP 4416 Printer?
If your Triumph Adler Printer is showing black or white vertical streaks, here are a few things to check: * First, look at the operator panel for toner levels. If you see a 'Toner low (C/M/Y/K)' message along with a color, replace the toner kit for that color. * Second, try cleaning the main charger units by opening the left cover and gently pulling the green wire cleaner knob in and out a few times for each unit. * Third, clean the advanced beam array lenses. Open the left cover and gently pull the green lens cleaner knob in and out twice. * Finally, refresh the drum by using the printer's built-in cleaning system via the operator panel.
What does 'Load EF' mean on my Triumph Adler Printer?
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 16 ppm |
| Print Speed (Color) | 16 ppm |
| Print Resolution | 600 x 600 dpi |
| Max Resolution B/W | 600 x 600 dpi |
| Max Resolution Color | 600 x 600 dpi |
| Display | 2-line LCD |
| AirPrint | No |
| Connectivity | USB 2.0, Ethernet |
| Operating System Compatibility | Linux |
| Media Size Class | A4 |
| Max Media Size | A4 |
| Paper Capacity | 250 sheets |
To Next Page