What does it mean when my Triumph Adler All in One Printer says 'Add toner'?
If your Triumph Adler All in One Printer displays the message 'Add toner' and the attention LED is lit, replace the toner container.
What does it mean if pressing the Start key on my Triumph Adler P-3025 MFP does not produce copies?
If pressing the Start key on your Triumph Adler All in One Printer does not produce copies, the machine may be in Sleep mode. Press any key on the operation panel to recover the machine from Sleep mode. The machine will be ready to copy within 15 seconds.
What to do if my Triumph Adler P-3025 MFP printouts are wrinkled or curled?
If printouts from your Triumph Adler All in One Printer are wrinkled or curled, the paper may be damp. Replace the paper with new paper.
What to do if part of the image from my Triumph Adler All in One Printer is periodically faint or shows white lines?
If part of the image from your Triumph Adler All in One Printer is periodically faint or shows white lines, the developer unit may not be attached correctly. Attach the developer unit correctly.
What does it mean when my Triumph Adler P-3025 MFP displays 'Polling box limit exceeded. Job is canceled.'?
If your Triumph Adler All in One Printer displays 'Polling box limit exceeded. Job is canceled.', the job is canceled. Press the OK key.
Why my Triumph Adler P-3025 MFP All in One Printer cannot send fax?
You cannot send a fax from your Triumph Adler All in One Printer because the modular cord is not connected correctly (connect the modular cord correctly) or the destination FAX line is busy (send again).
Why are blank sheets ejected from my Triumph Adler All in One Printer?
If blank sheets are ejected from your Triumph Adler All in One Printer, it may be because the originals are not loaded correctly. When placing originals on the platen, place them face-down and align them with the slit glass. When placing originals in the document processor, place them face-up.
Why are my Triumph Adler P-3025 MFP printouts too dark?
If your Triumph Adler All in One Printer printouts are too dark, it could be because the machine is in Auto Density mode (set the correct density level for auto density) or the machine is in Manual Density mode (select the correct density level).
What to do if my Triumph Adler P-3025 MFP All in One Printer cannot print?
If your Triumph Adler All in One Printer cannot print, ensure that the power cord is plugged into an AC outlet and the power switch is turned on. Check that the printer cable is securely connected and that the machine was powered on after connecting the printer cable. If the print job is paused, press [Resume] (the Left Select key) to resume printing. If there is an error message displayed, follow the corresponding procedure.
What to do if my Triumph Adler P-3025 MFP All in One Printer paper often jams?
If your Triumph Adler All in One Printer paper often jams, make sure you load the paper correctly. Also, if the paper is of the supported type but is in poor condition, remove the paper, turn it over, and reload it. Replace the paper with new paper if it is curled, folded, or wrinkled. Finally, remove any jammed paper from the machine.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Laser |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 50, 000 pages |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 kbps |
| Paper Capacity | 250 sheets |
| Duplex Printing | Yes |
| Interface | USB 2.0, Ethernet |
| Display | LCD |
| Processor | 800 MHz |
| Continuous copy | 1-999 copies |
| Dimensions (W x D x H) | 417 x 412 x 437 mm |
| Weight | 19 kg |
| Print Speed (Black) | 25 ppm |
| Copy Speed (Black) | 25 copies per minute |
| Scan Speed | 25 ppm |
| Fax Resolution | 300 x 300 dpi |
| Fax Memory | 256 sheets |
| Paper output | 150 sheets |
| Paper size | A4, A5, A6, Letter, Legal |
| Paper weight | 60 – 220 g/m² |
| Print functions | Watermark, Poster |
| Zoom range | 25-400% |
| Scan features | Scan to Email |
| Operating System Compatibility | Windows, Mac, Linux |
To Next Page