What does it mean if pressing the Start key on my Triumph Adler All in One Printer does not produce copies?
If pressing the Start key on your Triumph Adler All in One Printer does not produce copies, the machine may be in Sleep mode. Press any key on the operation panel to recover the machine from Sleep mode. The machine will be ready to copy within 15 seconds.
What to do if my Triumph Adler P-3020 MFP paper often jams?
If your Triumph Adler All in One Printer paper often jams, make sure you load the paper correctly. Also, if the paper is of the supported type but is in poor condition, remove the paper, turn it over, and reload it. Replace the paper with new paper if it is curled, folded, or wrinkled. Finally, remove any jammed paper from the machine.
What to do if my Triumph Adler P-3020 MFP All in One Printer cannot print?
If your Triumph Adler All in One Printer cannot print, ensure that the power cord is plugged into an AC outlet and the power switch is turned on. Check that the printer cable is securely connected and that the machine was powered on after connecting the printer cable. If the print job is paused, press [Resume] (the Left Select key) to resume printing. If there is an error message displayed, follow the corresponding procedure.
Why my Triumph Adler All in One Printer cannot send fax?
You cannot send a fax from your Triumph Adler All in One Printer because the modular cord is not connected correctly (connect the modular cord correctly) or the destination FAX line is busy (send again).
Why is an image size shrunk vertically or horizontally when displaying an image sent from my Triumph Adler All in One Printer on the PC?
When displaying an image sent from your Triumph Adler All in One Printer on the PC, an image size is shrunk vertically or horizontally because you have selected 200×100dpi Normal or 200×400dpi Super Fine for the scan resolution. Select a scan resolution other than 200 × 100dpi Normal or 200 × 400dpi Super Fine when sending an image.
What does it mean when my Triumph Adler P-3020 MFP All in One Printer displays 'Polling box limit exceeded. Job is canceled.'?
If your Triumph Adler All in One Printer displays 'Polling box limit exceeded. Job is canceled.', the job is canceled. Press the OK key.
What does it mean when my Triumph Adler P-3020 MFP says 'Check cassette 1'?
If your Triumph Adler All in One Printer displays 'Check cassette 1', a paper lift error has occurred in the paper source's cassette. Pull out the cassette for the paper source displayed (either the paper cassettes or optional paper feeders) and check if the paper is loaded correctly.
What does it mean when my Triumph Adler P-3020 MFP All in One Printer says 'Close front cover'?
If your Triumph Adler All in One Printer displays 'Close front cover', there is a cover that is open. Close the cover indicated on the operation panel.
What to do if a paper jam occurs on my Triumph Adler P-3020 MFP?
If a paper jam occurs on your Triumph Adler All in One Printer, a message will be displayed about the jam and copying or printing will stop. Leave the power switch on and to remove the jammed paper refer to the following information below.
What to do if my Triumph Adler P-3020 MFP All in One Printer printouts are wrinkled or curled?
If printouts from your Triumph Adler All in One Printer are wrinkled or curled, the paper may be damp. Replace the paper with new paper.
Explains safety warnings and symbols used in the guide.
Basic steps to make copies using the machine's Start key.
Instructions for printing via network or USB connection.
Safety precautions for handling toner and waste toner boxes.
Covers fundamental operations like copying, printing, and sending.
Details various functions available for copying.
Explains functions for sending scanned originals.
Explains how to check job status, history, and cancel jobs.
Covers machine settings configurable via the operation panel.
Describes cleaning procedures and toner replacement.
Offers solutions for common machine problems and errors.
Explains user login administration and job accounting features.
Describes how to log in and out of the machine for user authentication.
Provides step-by-step instructions for performing basic copying.
Outlines the process for sending scanned images.
Instructions on how to cancel print or send jobs in progress.
Displays the status of jobs being processed or waiting to print.
Describes how to pause and resume printing/waiting jobs.
Instructions on how to cancel print or send jobs in progress.
Adjusts printing quality and performs machine maintenance.
Configures network settings like LAN interface and TCP/IP.
Sets up security functions like IPSec, SSL, and SNMPv3.
Describes cleaning procedures for the glass platen and document processor.
Provides instructions for replacing the toner container.
Offers solutions for common machine issues like print quality and paper jams.
Explains how to handle alphanumeric error messages displayed on the panel.
Guides on how to remove jammed paper from different locations.
Specifies how user access is administered and how to add/manage users.
Manages copy/print counts by assigning IDs to accounts.
General| Brand | Triumph Adler |
|---|---|
| Model | P-3020 MFP |
| Category | All in One Printer |
| Language | English |
To Next Page