315
33. Fit the crankshaft locking pin plug and tighten to 33 Nm.
1. Locking pin plug
Perform the following operations:
• Valve Clearance Measurement
• Camshaft Cover - Installation
• Plenum - Installation (All Markets Except US) or Plenum - Installation (US
Markets Only)
• Clutch Cover - Installation
• Fuel Tank - Installation
• Battery - Installation
• Seat - Installation
Valve Clearances
Camshaft, valve, valve shim and valve seat wear affects the valve clearances. The effect of
this wear is to change the gap between the camshaft and tappet bucket, causing engine
noise and improper running. If the valve clearances become too small, permanent
To Next Page
Loading...
