67
Maintenance and Adjustment
Once the correct level is reached, re-install
and fully tighten the filler plug.
• Once the correct level is reached,
install and fully tighten the filler plug.
Oil and Oil
Filter Change
1. Oil drain plug
The engine oil and filter must be replaced in
accordance with scheduled maintenance
requirements.
• Warm up the engine thoroughly,
and then stop the engine.
• Place an oil pan beneath the engine.
• Remove the skid pan (if fitted).
• Remove the engine drain plug.
If the engine has recently been running,
the exhaust system will be hot. Before
working on or near the exhaust system,
allow sufficient time for the exhaust system
to cool as touching any part of a hot
exhaust system could cause burn injuries.
Prolonged or repeated contact with engine
oil can lead to skin dryness, irritation and
dermatitis. In addition, used engine oil
contains potentially harmful contaminants
which can cause cancer. Wear suitable
clothing and avoid skin contact.
To Next Page
Loading...
