MAINTENANCE
139
Operation description
Odometer Reading in Miles (km) or Time Period, whichever comes first
First
Service
Annual
Service
Mileage Based Service
Daily
600 Mile
(1,000 Km)
or 6 Month
Service
Year
6,000 and
18,000 Mile
(10,000 and
30,000 Km)
Service
12,000 Mile
(20,000 Km)
Service
24,000 Mile
(40,000 Km)
Service
Steering and Suspension
Steering - check for free operation • • • • • •
Front and rear suspension - check for damage/
leaks/smooth operation
• • • • • •
Steering head bearings - check/adjust - except first
service
• • • •
Steering head bearings - lubricate • •
Rear suspension unit and linkage - lubricate (single
rear suspension unit models only)
• •
Fork oil - replace •
Brakes
Brake system - check operation •
Brake pads - check wear levels* • • • • • •
Brake fluid levels - check • • • • • •
Brake master cylinders - check for fluid leaks • • • • •
Brake calipers - check for fluid leaks and seized
pistons*
• • • • •
Brake fluid - replace - every 2 years, regardless of
mileage*
Every two years, regardless of mileage
Final Drive
Drive chain slack - check/adjust • • • • • •
Drive chain - wear check* • • • • •
Drive chain - lubricate • • • • •
Drive chain rubbing strip - check for wear, cracks or
damage*
• • • • •
Electrical
Lights, instruments and electrical systems - check/
adjust
• • • • • •
General
Bank angle indicators - check for wear* • • • • • •
Center and/or side stand - check for wear/smooth
operation
• • • • • •
Instruments and engine ECM - check for latest
calibration download using the Triumph diagnostic
tool
• • • • •
Fasteners - inspect visually for security • • • • •
Side stand pivot pin - clean/grease • • • • •
Carry out all outstanding Service Bulletin and
warranty work
• • • • •
Carry out road test • • • • •
Complete the service record book and reset the
service indicator (if equipped)
• • • • •
To Next Page
Loading...
Need help?
General
