Triumph Street Triple RS 2022 User Manual

MAINTENANCE
163
Wheel Bearings Inspection
Warning
Riding with worn or damaged front or
rear wheel bearings is dangerous and
may cause impaired handling and
instability leading to an accident.
If in doubt, have the motorcycle
inspected by an authorized Triumph
dealer before riding.
The wheel bearings must be inspected
at the intervals specified in the
scheduled maintenance chart.
ckaf
Inspecting the Wheel Bearings
To inspect the wheel bearings:
▼ Position the motorcycle on level
ground, in an upright position.
▼ Raise the front wheel off the ground
and support the motorcycle.
▼ Standing at the side of the
motorcycle, gently rock the top of
the front wheel from side to side.
▼ If any free play can be detected, ask
your authorized Triumph dealer to
inspect and rectify any faults before
riding.
▼ Reposition the lifting device and
repeat the procedure for the rear
wheel.
▼ Remove the support and place the
motorcycle on the side stand.
Note
If the wheel bearings in the front or rear
wheel allow play in the wheel hub, are
noisy, or if the wheel does not turn
smoothly, have your authorized Triumph
dealer inspect the wheel bearings.

Triumph Street Triple RS 2022 Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, inline 3-cylinder
Displacement	765 cc
Transmission	6-speed
Front Tyre	120/70 ZR17
Rear Tyre	180/55 ZR17
Power	128 hp (95.6 kW) @ 12, 000 rpm
Torque	80 Nm @ 9, 500 rpm
Fuel Capacity	17.4 litres (4.6 US gal)
Dry Weight	166 kg
Wet Weight	189 kg
Front Suspension	Showa 41 mm upside down
Rear Suspension	Ohlins STX40 piggyback reservoir monoshock, adjustable compression and rebound damping and preload adjustment
Front Brakes	Twin 310 mm floating discs, Brembo 4-piston radial monobloc calipers
Rear Brakes	Single 220 mm disc, Brembo single piston caliper
Frame	Aluminium beam twin spar