Triumph Tiger User Manual

87
Maintenance and Adjustment
Tyres
Typical Tyre Marking
This motorcycle is equipped with tubeless
tyres, valves and wheel rims. Use only tyres
marked 'TUBELESS' and tubeless valves on
rims marked 'SUITABLE FOR TUBELESS
TYRES'.
Tyre Inflation Pressures
Correct inflation pressure will provide
maximum stability, rider comfort and tyre life.
Always check tyre pressures before riding
when the tyres are cold. Check tyre pressures
daily and adjust if necessary. See the
Specification section for details of the correct
inflation pressures.
Wheel Marking
Warning
Incorrect tyre inflation will cause abnormal
tread wear and instability problems that
may lead to loss of control and an accident.
Under-inflation may result in the tyre
slipping on, or coming off the rim.
Over-inflation will cause instability and
accelerated tread wear.
Both conditions are dangerous as they may
cause loss of control leading to an accident.
cedc

Triumph Tiger Specifications

General

Displacement	888 cc
Compression Ratio	11.27:1
Fuel System	Multipoint sequential electronic fuel injection
Exhaust	Stainless steel 3 into 1 header system, side mounted stainless steel silencer
Gearbox	6-speed
Swingarm	Twin-sided, cast aluminium
Front Wheel	Cast aluminium, 19 x 2.5 in
Rear Wheel	Cast aluminium, 17 x 4.25 in
Front Tyre	100/90-19
Rear Tyre	150/70R17
Wet Weight	210 kg
Engine	Liquid-cooled, in-line 3-cylinder
Bore x Stroke	78.0 mm x 61.9 mm
Clutch	Wet, multi-plate
Frame	Tubular steel frame
Rear Brakes	Single 255 mm disc, ABS
Tank Capacity	20 L
Wheelbase	1, 555 mm