Maintenance and Adjustment
124
Also inspect the sprockets for unevenly
or excessively worn or damaged teeth.
If there is any irregularity, have the drive
chain and/or the sprockets replaced by
an authorised Triumph dealer.
Refit the chain guard, tightening the
fixings to 9Nm.
ccol
WORN TOOTH
(ENGINE SPROCKET)
WORN TOOTH
(REAR SPROCKET)
(Sprocket wear exaggerated for
illustrative purposes)
Never neglect chain maintenance and
always have chains installed by an
authorised Triumph dealer.
Use a genuine Triumph-supplied chain
as specified in the Triumph Parts
Catalogue.
The use of non-approved chains may
result in a broken chain or may cause
the chain to jump off the sprockets
leading to loss of motorcycle control
or an accident.
If the sprockets are found to be worn,
always replace the sprockets and
drive chain together.
Replacing worn sprockets without also
replacing the chain will lead to
premature wear of the new sprockets.
To Next Page
Loading...
