Triumph XRX - Electrical Accessory Socket

General Information
81
To attach a helmet to the motorcycle,
remove the pillion seat and loop the
helmet chin strap over the hook. Ensure
the flat area above the hook is not
obstructed by the helmet strap, as this
will prevent the pillion seat engaging
correctly.
1. Helmet hook flat area
To secure the helmet, refit the seat and
lock into position.
Electrical Accessory Socket
1. Electrical accessory socket
An electrical accessory socket is
provided on the motorcycle, located next
to the ignition switch.
The socket will provide a 12 volt electrical
supply.
Warning
Never ride the motorcycle with
helmet(s) secured to the helmet hook.
Riding the motorcycle with helmet(s)
secured to the helmet hook may cause
the motorcycle to become unstable
leading to loss of control and an
accident.
Caution
Do not allow helmets to rest against a
hot silencer. The helmet may be
damaged.
1
cgif
1
cgil