General Information
77
To refit the seat, engage the seat's two
brackets under the loops on the
subframe and press down at the rear to
engage in the seat lock.
1. Pillion seat brackets
2. Subframe loops
The rider's seat is only correctly
retained and supported once the
pillion seat is correctly fitted. Never
ride the motorcycle with the pillion
seat detached or removed, as the
front seat will not be secure and may
move.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
To prevent detachment of the seat
during riding, after fitting always
grasp the seat and pull firmly
upwards. If the seat is not correctly
secured, it will detach from the lock. A
loose or detached seat could cause
loss of motorcycle control and an
accident.
To Next Page
Loading...
