10204M-10
HOW TO APPLY LUBRICANT
• Liftonesideoftreadbelt.
• Pouronehalfofthelubricantbottleunderthecentreofthetreadbeltonthetopsurfaceofthetreadboard.
• Walkonthetreadmillataslowspeedfor3to5minutestoevenlydistributelubricant.
NOTE: DO NOT over lubricate treadboard. Any excess lubricant that comes out should be wiped off.
NOTE: ONLY USE HALF THE BOTTLE OF LUBRICANT PER APPLICATION.
• NOTE:Ifyourlubricantisnished,thetreadbeltcanbelubricatedwithDubbin.
LUBRICATION SCHEDULE
• Checkthetreadboardlubricationduringinstallation.Ifit’snecessary,lubricatethetreadboardusingonehalfofthe
lubricantprovided,beforeusingthetreadmillforthersttime.
• Ifthetreadmillisusedonaregularbasis,therunningdeckshouldbelubricatedonceamonth.
• Ifthetreadmillhasnotbeenusedfortwomonthsormore,thetreadboardmustbelubricatedbeforeuse.
6. MAINTENANCE
HOW TO CHECK TREADBELT FOR PROPER
LUBRICATION
•Liftonesideofthetreadbeltandfeelthetopsurfaceofthe
treadboard.
•Ifthesurfaceisslicktothetouch,thennofurtherlubricationis
required.
•Ifthesurfaceisdrytothetouch,applyonepacketoflubricant
or half of the bottle of lubricant.
BELT TRACKING ADJUSTMENT
• Ifduringuseyounoticethattherunningbelteithershiftstotherightortheleftofcentre,switchoffthetreadmill,
remove the “Safety Key” and unplug the equipment from the AC power source.
• Iftherunningbeltshiftsleft,usingHexwrenchprovided,turn
the left rear roller adjustment clockwise no more than 1/4” of a turn
(if the running belt shifts right, adjust the right rear roller).
• RemovetheHexwrench,insertthe“SafetyKey”andinsertthe
AC power cord into the AC outlet. Turn on your treadmill and
observe after running for a few minutes to see if the problem
has been corrected.
• Thismaytakeseveraladjustments,sorepeattheaboveprocedure.
Your treadmill should require little maintenance other than to periodically apply lubricant. Lubricating under the
treadbeltwillensuresuperiorperformanceandextendthetreadmill’slifeexpectancy.