How to fix error E01 on a Trojan TR 1500 Treadmill?
Error code E01 on your Trojan Treadmill suggests a possible communication failure between the computer and the bottom control board. Check that the wires connecting these components are correctly connected. If the issue continues, consider replacing the entire control board.
What to do if my Trojan Treadmill shows error E05?
If your Trojan Treadmill displays error code E05, it indicates a possible current overload. This could be due to the motor being stuck or an excessive current being detected, triggering the self-protection system. Adjust the machine and restart it. Also, check for unusual noises from the motor or if the motor/bottom control board is burnt out. Replace the motor and/or bottom control board if necessary, ensuring correct voltage moving forward.
What does error E02 mean on my Trojan TR 1500?
The E02 error on your Trojan Treadmill indicates a protection against exploding. If there is a bad connection or an open circuit in the motor, replace the motor or check the connection. If the power cable has a puncture, replace the power cable or the control board.
What to do if my Trojan TR 1500 displays error E03?
If your Trojan Treadmill is showing error code E03, it indicates a possible no sensor signal. First, check that the speed sensor wire connection is correct and reconnect it if necessary. If the problem persists, inspect the speed sensor for damage and replace it if needed.
Why does my Trojan TR 1500 Treadmill show error E04?
If your Trojan Treadmill is showing error code E04, this indicates a possible incline motor study failure. Begin by checking that the incline motor wires are correctly connected; reconnect them if necessary. Next, inspect the incline motor wire for any damage and replace it if needed. Finally, after checking the connections and wires, press the study key on the incline motor to reset it.
What causes error E08 on a Trojan TR 1500 Treadmill?
If your Trojan Treadmill displays error code E08, it suggests a possible driver problem. Check if the 8-pin 24C02 integrated circuit on the bottom control board is correctly connected; reconnect if necessary. If the problem persists, you may need to replace the bottom control board.
Consult a physician before starting exercise, stop if feeling faint, dizzy, or in pain.
Set up on a solid surface, away from moisture, with adequate ventilation and space.
Use as intended, avoid improper/excessive exercise, one person at a time, maintain balance.
Check for damage, use only approved parts, tighten bolts, maintain labels.
Instruct users, keep children away from moving parts, avoid loose clothing/jewellery.
Maximum user weight is 130 kg.
Improper grounding can cause electric shock. Check with a qualified electrician.
Running Deck, Set-up Size, User Weight, Speed, Programs listed.
Check hardware packaging, use supplied tools.
Visual representation of parts and their numbers for assembly.
Ensure enough space, use supplied parts, check exploded drawing for completeness.
Open carton, place Main Frame on a flat surface, do not cut packing straps immediately.
Ensure all bolts are tightened before operating the treadmill.
Explains PROGRAM, MODE, START, STOP, SPEED +/-, INCLINE +/- keys.
Details on using pre-set programs, speed, incline, and stages.
Information on creating and using user-defined programs (UO1-UO3).
How the safety key works to stop the treadmill.
Message failure between computer and bottom control board.
Protection against exploding (potential motor issue).
No sensor signal detected.
Incline motor study failure.
Possible current overload.
Possible driver problem.
Unplug before maintenance, stop before folding, void warranty if not lubricated.
Recommendation for periodic lubrication based on usage.
Warranty does not cover damage from disaster, misuse, commercial use, etc.
Details on repair costs for items under and out of warranty.
General| Motor | 2.5 HP |
|---|---|
| Speed | 0.5 - 10 mph |
| Incline | 0 - 12% |
| User Weight Capacity | 300 lbs |
| Display | LCD |
| Weight | 200 lbs |
| Folding | Yes |
| Programs | 12 pre-set programs |
| Heart Rate Monitoring | Grip sensors |
To Next Page
