10
ASSEMBLY STEPS
1. PREPARATION
• Before assembling make sure that you will have enough space around the item.
•
Use the supplied parts and hardware for the assembly.
•
Before assembling please check whether all the required parts have been supplied as per the exploded
drawing on the opposite page.
STEP 1
STEP 1:
Open the carton, remove all the parts and place the
Main Frame on a at surface.
Note: Please do not cut the packing straps
immediately.
STEP 2:
Cut the straps when the main frame has been securely
placed on a at and dry surface.
Note: do not move it any more.
Connect the Computer Down Wire (98) and the Lower
Extension Wire (97).
Lock the Left and Right Upright Tube (3) on the
Bottom Frame (1) with the Hex Socket Screws (57) and
the Lock Washer (83).
Note: Please do not tighten the Hex Socket Screw (57)
for the time being.
Place the Protective Cover (29 L/R) over the Left and
Right Upright Tube (3) respectively as shown in the
illustration.
STEP 2
3
3
57
57
83
83
98
97
1
29L
29R
57
83
#20M03T020 ELITE 2000 Treadmill UM.indd 10 2020/04/07 10:05 AM
To Next Page
Loading...
