11
ASSEMBLY STEPS
1. PREPARATION
• Before assembling make sure that you will have enough space around the item.
• Use the supplied parts and hardware for the assembly.
• Before assembling, please check whether all the required parts have been supplied as per the exploded
drawing on the opposite page.
STEP 1:
Simultaneously raise both Handrail Tubes of
the Frame (1) as shown and secure with
2 Truss Hex Screws (M8 x P1.25 x 40)
(SAEK242) Round End (95).
STEP 2:
Simultaneously raise the Left and Right
Uprights and secure with 2 Truss Hex Screws
(M8 x P1.25 x 15) (105) and 2 Truss Hex Screws
(M8 x P1.25 x 25) (SAE812525) Round. End(103).
STEP 1
STEP 2
To Next Page
Loading...
