Need help?Do you have a question about the Trolex XD One and is the answer not in the manual?
Specifies the applications and environments for the XD One monitor.
Defines operational boundaries to ensure performance and safety.
Outlines safety measures related to the device's laser components.
Details the path air takes through the device for particulate sampling.
Lists the EU directives and UK regulations the device complies with.
Describes the information presented on the device's product label.
Provides detailed technical specifications for the XD One device.
Specifies the physical dimensions of the XD One device.
Explains the various methods for mounting the XD One device.
Lists the factory default settings for the XD One device.
Explains the meaning of the device's icons and indicators.
Details the various operational sequences of the XD One.
Step-by-step guide to powering on the XD One device.
Step-by-step guide to powering off the XD One device.
Describes the automatic self-test performed by the instrument on power-up.
How to manually trigger a self-test of the XD One's system functionality.
How the device handles accidental activation of the power/function switch.
Explains how the device manages its battery power and indicates status.
Describes the automatic shutdown procedure when battery levels are critically low.
How to view detailed battery status via software.
How the device calibrates and maintains battery monitoring accuracy.
Details how power management functions within different operating modes.
Describes the 'In-cab' operating mode and its usage.
Explains the 'Data log' mode for passive monitoring and data capture.
Details the 'Live readout' mode for streaming real-time particulate data.
Explains the calculations used for STEL and TWA alarm thresholds.
Describes the process for acknowledging and clearing alarms.
Instructions and indicators for charging the XD One device.
Overview of the BreatheLITE software for device management and data analysis.
Parameters that can be configured using the BreatheLITE software.
How to download and review particulate data using BreatheLITE.
Procedure for updating the device's operating firmware.
Guide for performing periodic visual inspections of the device.
Steps for cleaning the XD One sensor and inlet.
Instructions for cleaning the device's labels and interface.
Information on checking and cleaning the device's air apertures.
How to perform an internal compliance check routine.
Interpreting the results of the compliance audit check.
Recommended maintenance schedules based on dust loading.
Considerations for operating the device near misting or atomizing systems.
How the device handles and resolves recoverable operating errors.
What happens when the device encounters non-recoverable fatal errors.
Explains the fault codes displayed by the device during operation.
Information on proper disposal according to WEEE directive.
Contact information for technical assistance and support.
How to provide suggestions or report errors in the publication.
General| Resolution | 1920 x 1080 (Full HD) |
|---|---|
| Panel Type | IPS |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178°(H)/178°(V) |
| VESA Mount | 100 x 100 mm |
| Connectivity | HDMI |
To Next Page