XD ONE USER MANUAL36
To acknowledge a latched alarm, press and hold the power button for 2 seconds then release
after which the XD One will confirm with an LED sequence: scrolling illumination of alarm
colour, followed by a scrolling green sequence.
Note: If an alarm is not acknowledged by the user, the XD One will remain latched with the
illuminated LED and audio warning indefinitely.
The XD One device will only re-alarm on increasing or continued particulate levels above the
permissible threshold, after the original alarm has been user acknowledged and self-cleared.
XD One_User manual_P5644.1601_Rev B
To Next Page
Loading...