15
When the EC Alarm is selected, press ENTER button to enter the EC Alarm setting page. The LCD screen will
display the MlN value and MAX value. Press ENTER button to activate the setting page and the MlN value
will be highlighted and blinking. Press UP button or DOWN button to change the MIN value, then press the
ENTER button to confirm and save the change. The LCD screen will show “Setting saved".
User can also press the DOWN button to select the MAX value directly to edit the setting if the user would
like to keep the MlN value unchanged. The steps to set the MAX value are similar.
a. EC Alarm:
When the Temp Alarm is selected, press the ENTER button to enter the Temp Alarm setting page. The LCD
screen will display the MlN value and MAX value. Press ENTER button to activate the setting page and the
MlN value will be highlighted and blinking. Press UP button or DOWN button to change the MIN value, then
press the ENTER button to confirm and save the change. The LCD screen will show “Setting saved” .
b. Temp Alarm:
ALARM SETTING
On the Setting page, press DOWN button to select the Alarm Setting, Press ENTER button and the LCD
screen will display four Settings for selection EC Alarm, Temp Alarm, pH Alarm and Moist Alarm. User can
press UP button or DOWN button to select anyone of them for setting.
or
To Next Page
Loading...
