17
SYSTEM SETTING
On the Setting page, press DOWN button to select the System Setting. Press ENTER button and the LCD
screen will display five Settings for selection: Temp Format, Time Setting and Serial Number, System Reset,
Calibration. User can press UP or DOWN button and ENTER to select any of them to change settings.
When the Moist Alarm is selected, press the Enter button to enter the Moist Alarm setting page. The LCD
screen will display the MIN value and MAX value. Press ENTER button to activate the setting page and the
MIN value will be highlighted and blinking. Press UP or DOWN button to change the MIN value, then press
the ENTER button to confirm and save the change. The LCD screen will show “Setting saved” .
d. Moist Alarm:
User can also press the DOWN button to select the MAX value directly to edit the setting if the user would
like to keep the MlN value unchanged. The steps to set the MAX value are similar.
or
To Next Page
Loading...
