05
The NFS-1 Aqua-XController is extremely easy to use. The backlit 128x128 LCD display will provide the user
with current conditions and access to all settings. All settings can be accessed by using the 6 push buttons
on the front of the unit. The button functions are described below.
UP / DOWN: The UP and DOWN buttons move the cursor up and down to select the item on the LCD display.
LEFT/RIGHT: The LEFT and RlGHT buttons move the cursor to previous page or next page, left item or right item.
BACK: The BACK button goes backwards to the previous page.
ENTER: The ENTER button is used to open the menu item to be changed as well as to accept and save the
new setting.
Familiarize yourself with the function of the 6 buttons on the front of the NFS-1 Controller in order to able to
access settings, and to better understand how to use the NFS-1 Control System to its greatest potential.
BUTTONS
Once you have connected 24V Control Board (s). 110V Control Board (s), Sensor Board (s) and Water
Detectors to the NFS-1 Controller, we can start using the unit.
Connect the plug-in power supply to the power connector on the bottom of the NFS-1 Controller.
NFS-1Controller will turn on and boot up.
START SETTINGS
UP DOWN LEFT RIGHT ENTER BACK
To Next Page
Loading...
