be flashing. Press UP or DOWN button to change the setpoint. Finally, press
ENTER button to confirm and save the change. The LCD will display " Setting
saved ".
3 ). Press DOWN button to select and enter the Temp Alarm page. The screen
will display the Min/Max setpoint. Press UP or DOWN button to select the Min or
Max setpoint. The selected item will be highlighted. Then press ENTER button
again, the current temperature setpoint will be flashing. Press UP or DOWN
button to change the setpoint. Finally, press ENTER button to confirm and save
the change. The LCD will display "Setting saved".
When the Temperature level exceeds the setting range, the unit will send a
To Next Page
Loading...
