press ENTER button to confirm and save the change.
User an also turn ON or OFF the Fuzzy Logic mode. Press DOWN button to
select the Fuzzy subject and then press UP or DOWN button to change
between ON and OFF status. Finally, press ENTER button to confirm and save
teh change.
NOTE :
1. Fuzzy Logic mode is only for the control of CO2 Regulator. Do not turn on
while connectig to a CO2 generator.
2. Fuzzy Logic mode counters rising or falling CO2 levels by quickly activating
the CO2 selenoid valve, allowing CO2 levels to be controlled more precisely.
To Next Page
Loading...
