EN 3
layer thickness measuring device BB20
Improper use
Do not use the device in potentially explosive atmospheres, for
measurements in liquids or at live parts. Trotec accepts no
liability for damages resulting from improper use. In such a
case, any warranty claims will be voided. Any unauthorised
modifications, alterations or structural changes to the device are
forbidden.
Personnel qualifications
People who use this device must:
• have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the
device.
Information about the device
Device description
The deviceBB20 is used to determine the coating thickness on
ferromagnetic and non-ferromagnetic metal surfaces. The
measuring device functions according to the magnetic induction
principle (for coatings on ferromagnetic surfaces) or the
turbulent flow principle (for coatings on non-ferromagnetic
surfaces).
The BB20 is a compact and versatile device suitable for quick,
precise and non-destructive measurements of coating
thicknesses.
Device depiction
No. Designation
1 USB interface
2 Blue button (back/ cancel)
3
button
4 ZERO button
5 Sensor
6 Battery compartment with cover
7 Power button
8
button
9 Red button (select/ confirm)
10 Display
To Next Page
Loading...
Need help?
General
