Trotec IDE 20 User Manual

EN 15
oil heater IDE 20 / IDE 30 / IDE 50 / IDE 60 / IDE 80
Available accessories
Accessories IDE 20
Article number
IDE 30
Article number
IDE 50
Article number
IDE 60
Article number
IDE 80
Article number
Hose connector - Ø 300 mm
6.100.006.180
Ø 440 mm
6.100.006.179
Ø 440 mm
6.100.006.179
Ø 440 mm
6.100.006.179
External thermostat
with 25 m cable
6.100.006.113 6.100.006.112 6.100.006.112 6.100.006.112 6.100.006.112
Exhaust gas pipe rigid,
length 1 m
6.100.006.212 6.100.006.212 6.100.006.210 6.100.006.210 6.100.006.210
90° arc connection for exhaust
gas pipe
6.100.006.218 6.100.006.218 6.100.006.216 6.100.006.216 6.100.006.216
Exhaust gas pipe rain cover 6.100.006.224 6.100.006.224 6.100.006.222 6.100.006.222 6.100.006.222
Air hose Tronect SP-C
1
- 6.100.001.265 6.100.001.270 6.100.001.270 6.100.001.270
Connection kit for external oil
tank
- 6.100.006.183 6.100.006.183 6.100.006.183 6.100.006.183
Adapter set tank kit – oil hose - 7.210.000.003 7.210.000.003 7.210.000.003 7.210.000.003
Tank line with quick couplings,
length 5 m
- 6.100.006.037
2
6.100.006.037
2
6.100.006.037
2
6.100.006.037
2
Fuel tank, 1,000litres - 6.100.006.011 7.210.000.011 7.210.000.011 7.210.000.011
Fuel tank, 3,000litres - 6.100.006.012 6.100.006.012 6.100.006.012 6.100.006.012
1
Important: The effective length of the hose for the above
devices is limited to a maximum of 4m! Tronect hoses with a
standard effective length of 7.6m will result in a forced switch-
off and must be shortened by the user to a max. effective length
of 4m for the application.
2
in combination with adapter set tank kit – oil hose (required
accessories)
Warning
Only use accessories and additional equipment
specified in the instructions.
Using insertion tools or accessories other than those
specified in the instructions may cause a risk of injury.

Trotec IDE 20 Specifications

General

Brand	Trotec
Model	IDE 20
Category	Heater
Language	English