Operating manual – Infrared camera
B - 6
Turning the Power On / Off
The power indicator remains lit while the power of the
camera is on.
1. Holding the camera cor-
rectly with your right hand,
put your thumb above the
key pad and put your fore-
fi nger in front of the defi -
nable trigger.
2. Press and hold the power
switch for 3 seconds. The
power indicator lights green.
3. After a while, a startup
image will appear on the
screen.
4. To turn off, hold the Power Hold the power switch
for 3 seconds. The power indicator goes off.
Checking the Information on the LCD Monitor
The LCD monitor has a fi eld of vision of 100% of the
actual shooting image.
The display shows the Info view.
About the operation indicator
The operation indicator shows the status of the camera.
Menu . . . . . . . . . . . . . . . . . . Represents the menu mode.
Null . . . . . . . . . . . . . . . . . . Represents the non-menu mode
no analysis tools selected.
1 - 4 . . . . . . . . . . . . . . Represents the current analysis tool
(sport 1 or spot 2 or spot 3).
Cap . . . . . . . . . . . . . . . . . . . . Reprents the current analysis
tool (auto-tracking spot).
Isot . . . . . . . . . . . . . . . . Represents the current analysis
tool (isothermnalysis).
E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Current emissivity.
. . . . . . . . . . . . . . . . . . . . . SD card has been inserted.
. . . . . . . . . . . . Bluetooth headset has been installed.
Before starting up the camera, please enter [Null]
mode. Press the cancel key repeatedly until you
see the message „null“ in the operation indicator.
Reading
Status of the camera
Live/
Freeze
Operation indicator
Current Emissivity
Battery Status
Time
Upper limit of
color scale
Lower limit of
color scale
Color scale
To Next Page
Loading...