EN 20
Operating manual – local air conditioner PAC 2010 E / PAC 2610 E
Cleaning the air filter
The air filters have to be cleaned as soon as they are dirty. This
is brought to light e.g. by a reduced capacity (see chapter Errors
and faults).
Warning
Ensure that the air filters are neither worn nor
damaged. The corners and edges of the air filters must
not be deformed or rounded. Before reinserting the air
filters, make sure that they are undamaged and dry!
1. Remove the air filters from the device.
2. Clean the filters using a slightly damp, soft, lint-free cloth. If
the filters are heavily contaminated, clean them with warm
water mixed with a neutral cleaning agent.
3. Allow the filters to dry completely. Do not put any wet filters
into the device!
4. Reinsert the air filters into the device.
To Next Page