Trotec PAC 3500 E - Advanced Operation and Safety; Remote Control Usage; Ventilation and Defrost Functions; Safe Shutdown Procedure

9 EN
Operating manual – local air conditioner PAC 3500 E
1. Switch the device off.
2. Hold onto the mains plug while pulling the power cable out
of the mains socket.
3. Carefully transport or wheel the device to a suitable location
for discharging the condensate (e.g. a drain) or provide a
suitable collection container.
4. Unscrew the sealing cap from the hose connector(5).
5. Remove the rubber stopper from the hose connection.
5
6. Connect a suitable hose (Ø = 13 mm) to the hose
connector. Check the hose for tight fit.
7. Lead the hose to a drain or sufficiently dimensioned
collection container. To ensure that the condensate can run
off, the hose must not be kinked, nor should it have to
overcome an uphill incline towards the drain.
8. Insert the mains plug into a properly secured mains socket.
9. Switch the device on.
Ventilation
In ventilation mode the room air is circulated, it will neither be
cooled nor dehumidified.
Possible fan speed settings are:
• low fan speed =
• medium fan speed =
• high fan speed =
1. Press the MODE button(26) until the ventilation mode
indication(21,
) appears on the display.
2. Press the FAN button(18) to set the desired fan speed.
ð The selected fan speed(27) is displayed.
ð The current room temperature is indicated on the
segment display(29).