10 EN
dehumidifier TTK 100 E
2. Remove the condensation tank.
3. Push one end of the hose onto the hose connection.
4. Check whether the hose is properly positioned on the
connection. If necessary, adjust the position through the
condensation tank opening.
5. Put the condensation tank back in.
6. Guide the other hose end to a suitable drain or sufficiently
dimensioned collection container. Please note that the
hose must not be kinked.
Remove the hose if you want to collect the condensate in the
condensation tank again. Allow the hose to dry prior to storage.
The hose can be connected in any operating mode for
continuous operation.
To Next Page
Loading...
