EN 15
dehumidifier TTK 100 E
2. Remove the air filter.
3. Clean the filter using a slightly damp, soft, lint-free cloth. If
the filter is heavily contaminated, clean it with warm water
mixed with a neutral cleaning agent.
4. Allow the filter to dry completely. Do not insert a wet filter
into the device!
5. Put the air filter back in.
6. Reinsert the flap into the device.
Emptying the condensation tank
If the condensation tank is full or not inserted correctly, the
TANK FULL LED(8) will be illuminated and the condensation
tank full indication(15) will be displayed. The compressor and
fan will switch off.
1. Take the condensation tank out of the device.
2. Empty the condensation tank over a drain or sink.
To Next Page
Loading...
