Trotec TTK 120 E - Filter Maintenance Procedures; Air Filter Cleaning and Replacement; Activated Carbon Filter Handling

EN 15
dehumidifier TTK 120 E / TTK 122 E
1. Remove the air inlet by loosening and removing both
screws.
2. Remove the air filter.
TTK 120 E
3. Clean the filter using a slightly damp, soft, lint-free cloth. If
the filter is heavily contaminated, clean it with warm water
mixed with a neutral cleaning agent.
4. Allow the filter to dry completely. Do not insert a wet filter
into the device!
5. Remove the activated carbon filter.
TTK 120 E
6. Clean the activated carbon filter with a dry, lint-free cloth
or a hoover if it is slightly dirty.
If heavily soiled, dispose of the activated carbon filter in
accordance with the national regulations and remove the
new activated carbon filter from the plastic cover.
7. Insert the cleaned or the new activated carbon filter.
TTK 120 E
8. Put the air filter back in.