B
Bradley SmithAug 10, 2025
Why Troy-Bilt Storm Tracker 1028 Snow Blower engine fails to start?
- AAngela NguyenAug 10, 2025
If your Troy-Bilt Snow Blower's engine won't start, possible causes include an empty or stale fuel tank (fuel becomes stale after thirty days), a blocked fuel line, the choke not being in the ON position, a faulty spark plug, the safety key not fully inserted into the ignition switch, a disconnected spark plug wire, improper use of the primer button (refer to the engine manual), or a closed fuel shut-off valve (if equipped). To resolve this, fill the tank with fresh gasoline, clean the fuel line, move the choke to the ON position, clean/adjust/replace the spark plug, fully insert the safety key, connect the spark plug wire, refer to the engine manual for primer button usage, and open the fuel shut-off valve if equipped.