To Next PageTo Next Page
Need help?Do you have a question about the Troy-Bilt Storm Tracker 2690XP and is the answer not in the manual?
General| Clearing Width | 26 inches |
|---|---|
| Speed Settings | 6 forward, 2 reverse |
| Electric Start | Yes |
| Weight | 220 lbs |
| Auger Diameter | 12 inches |
| Impeller Diameter | 12 inches |
| Throw Distance | Up to 40 feet |
| Headlight | Yes |
| Warranty | 2-Year Limited |
| Engine | 277cc |
| Intake Height | 21 inches |
| Auger Type | Serrated steel |
| Chute Rotation | 200 degrees |
| Starting System | Electric start |
| Transmission | Friction disc |
| Chute Control | Crank |
Record model and serial number for support and service.
Contact information and options for assistance with assembly, operation, or maintenance.
Critical warnings and instructions for safe operation of the snow thrower.
Guidelines for operator training, area inspection, and pre-operation checks.
Safe procedure to clear snow blockages from the discharge chute using the clean-out tool.
Notes on engine modification, emissions, and spark arrestor requirements.
Lists all items included in the snow thrower packaging.
Step-by-step instructions for assembling the handle to the main body.
Instructions for assembling and connecting the chute and its control rod.
Information on storing and locating replacement shear pins.
How to adjust the skid shoes for different surface conditions and wear.
Description and location of the chute clean-out tool.
Description of the shift lever for speed/direction and the automatic headlight.
Instructions on how to activate and use the heated handle grips.
Explains the role of skid shoes in relation to the shave plate and ground clearance.
How to use track steering triggers and the drive control lever.
Operation of the auger engage control and chute directional/tilt controls.
Explanation of track lock lever positions for transport, normal, and packed snow.
Steps for safely using the clean-out tool to clear the chute.
Instructions for starting and stopping the snow thrower engine.
How to engage the drive system and the augers for snow throwing.
How to steer the machine and set the track position for different conditions.
Instructions on how to activate and use the heated handle grips.
Reference to the Engine Operator's Manual for engine-specific maintenance.
Inspection and replacement of wear parts like shave plates and skid shoes.
Instructions for lubricating the gear shaft for optimal performance.
Procedure for lubricating the auger shaft and bearings.
How to adjust the shift cable for proper speed engagement.
Steps to adjust the snow thrower's track tension to account for stretching.
How to adjust the drive control cable for proper engagement and disengagement.
Procedure to adjust the chute control rod for proper rotation.
Guidelines for preparing and storing the snow thrower during the off-season.
Step-by-step guide for replacing the auger drive belt.
Instructions for removing and replacing the snow thrower's drive belt.
Procedure for inspecting and replacing the friction wheel assembly or rubber.
Instructions for replacing shear pins and important cautions regarding OEM parts.
