Troy-Bilt STORM 5524 User Manual (English)

To Next Page

Safety • Assembly • Operation • Adjustments • Maintenance • Troubleshooting • Parts Lists • Warranty

Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-

covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).

If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law

(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester

for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland,

Ohio 44136-0019.

MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

PRINTED IN U.S.A

READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION

IMPORTANT

OPERATOR’S MANUAL

06/17/2005

FORM NO. 769-01278C

Two-Stage Snow Thrower — STORM 5524

Need help?

Do you have a question about the Troy-Bilt STORM 5524 and is the answer not in the manual?

Troy-Bilt STORM 5524 Specifications

General

Product Type	Two-Stage Snow Blower
Engine Displacement (cc)	208
Clearing Width (in)	24
Drive Type	Self-Propelled
Number of Speeds	6
Start Type	Electric Start
Intake Height (in)	21
Auger Material	Steel
Wheel Size (in)	13
Engine Type	4-Cycle
Chute Control	Remote